control
Swing
You can move the camera between two preset points to monitor the course.
Swing setup
1. Select the <Swing> menu.
2. Select the [preSet] button for a type to set
(PAN, PAN/TILT or TILT).
3. Set a start preset and an end preset.
4. Set a speed and switch time.
5. Press the <oK> button to save.
to execute the swing
1. Select the <Swing> menu.
2. Press the <Start> button of a swing to execute (PAN, PAN/TILT or TILT).
3. The swing function will be executed.
18_ control
trace
With the joystick or camera buttons, you can instruct the controller to record the camera
movement for a specific time and repeat the movement.
to set a trace
1. Select the <trace> menu.
2. From the trace list, select an individual item
and click the <Settings> button.
3. Using the joystick or camera control buttons,
control the motion of a camera to save
settings.
4. Press the <Stop> button and settings will be
completed.
to execute a trace
1. Select the <trace> menu.
2. Select the number of a trace to execute.
3. Press the <Start> button.
4. The trace function will be executed.