CYBEX CLOUD Q Owner's Manual page 22

Hide thumbs Also See for CLOUD Q:
Table of Contents

Advertisement

Available languages

Available languages

7. Pull up on Harness Straps to snug around the child's
hips while holding the Harness Buckle in place.
8. Slowly pull the adjuster strap to tighten the Shoulder Straps.
A snug strap should not allow any slack. It lies in a relatively
straight line without sagging. It does not press on the child's
flesh or push the child's body into an unnatural position.
9. Position the center of the Chest Clip even with the
child's armpits. Make sure the Shoulder Pads do not
interfere with the placement of the Chest Clip.
If the Shoulder Pads don't allow a proper fit,they can be removed to
provide more space for the Chest Clip. Unsnap to remove.
10. Harness Pinch Test. To test for a properly tightened
Harness, pinch the shoulder strap. A snug Harness
should not allow you to pinch any slack when pinched
between your thumb and forefinger. If needed, pull
adjuster strap further for a tight and proper fit.
To keep child warm, place a blanket over child and Infant Carrier, AFTER
you have properly secured and tightened Harness around your child.
ALWAYS KEEP child properly secured in Harness.
NEVER SECURE child in Infant Carrier dressed in a
bulky garment or heavy clothing.
21
USING THE INFANT CARRIER
7
9
10
8

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents