Adjusting The Seat - CYBEX CLOUD Q Owner's Manual

ADJUSTING THE SEAT

The seat has a headrest that automatically adjusts the harness
height without the need to rethread it. The car seat may be
adjusted up and down through eleven positions to perfectly fit
your baby.
The Cloud Q is shipped in the lowest position with the Infant
Insert already in position.
1. Unbuckle the Harness and Chest Clip
2. Place the child in the Infant Carrier, making sure
the buttocks are sitting in the very bottom of the
seat, with their crotch at the crotch strap.
3. Adjust for your baby by pulling up on the gray
plastic No Rethread Harness Adjuster
sliding the seat up until the Harness Slots are even
with or slightly below your child's shoulders.
For proper use of the Infant Carrier, the Harness
shoulder straps MUST be AT or just BELOW your child's
shoulders.
Regularly check for proper harness height as your child grows.
INFANT INSERT
The Infant insert will help provide a better harness fit for smaller
babies, as well as stability for the torso.
We recommend using the Infant Insert until the baby weighs about
11 lbs. (5 kg) or about 3 months.
19
USING THE INFANT CARRIER
while
a
a