Operation; Start-Up; Switching Off; Zeroing - KERN IFB-BA-e-1012 Operating Instructions Manual

7 Operation

7.1 Start-up

Press , and the instrument will carry out a self-test . The instrument is
ready for weighing when a weight display appears.

7.2 Switching Off

Press until the display disappears.

7.3 Zeroing

Resetting to zero corrects the influence of light soiling on the weighing plate.
Resetting range ± 2 % max.
The instrument comprises an automatic zero setting function, however, the
instrument can be reset to zero whenever needed as described below.
Remove load from weighing system
Press , and the zero display as well as the

7.4 Simple weighing

Place goods to be weighed on balance.
Wait for stability display
Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. The instrument may be
damaged by overloading.
Exceeding of maximum load is indicated by "----" as well as a signal sound.
Remove load from weighing system or reduce preload.
16
.
STABLE
indicator will appear.
ZERO

IFB-BA-e-1012