Data Output Rs 232C; Technical Data - KERN IFB-BA-e-1012 Operating Instructions Manual

10 Data output RS 232C

Weighing data can be issued according to menu settings either via the RS 232C
interface or by pressing
This data exchange is asynchronous using ASCII - Code.
The following conditions must be met to provide successful communication between
the weighing balance and the printer.
• Use a suitable cable to connect the weighing balance to the interface of the
printer. Faultless operation requires an adequate KERN interface cable.
• Communication parameters (baud rate, bits and parity) of balance and printer
must match. For detailed description of interface parameters see chpt. 8,
menu block „P1 COM"

10.1 Technical Data

Connector 25 pin d-subminiature bushing
Pin 2 input
Pin 3 output
Pin 5 signal earth
Baud rate 600/1200/2400/4800/9600
Parity 8 bits, no parity / 7 bits, even parity / 7 bits, odd parity
28
via the interface.
IFB-BA-e-1012