KERN IFB-BA-e-1012 Operating Instructions Manual page 19

Press , the current setting for the upper limit will be
shown.
Use the navigation keys (See chpt. 2.1.1) to set the upper
limit, e. g. 1100 kg; the currently active digit will be flashing.
Confirm input by
Select by
BEEP
Press , the current setting for the audio sound will be
shown.
Use (no, ok, ng) to select the desired setting.
Confirm input by
Press and the weighing system will go into tolerance
weighing mode. From here evaluation takes place whether
the goods to be weighed are within the two tolerance limits.
Weighing with tolerance range
Tare, if using a weighing container.
Put on goods to be weighed, tolerance control is started
• The tolerance control is not active when the weight is under 20d.
• To delete limits enter a value of "00.000 kg".
IFB-BA-e-1012
.
.
.
19