Information is available on KERN's home page
monitoring of weighing system test substances and the test weights required for this.
In KERN's accredited DKD calibration laboratory test weights and weighing systems
may be calibrated (return to the national standard) fast and at moderate cost.
4 Basic Safety Precautions
4.1 Pay attention to the instructions in the Operation Manual
Carefully read this operation manual before setup and
commissioning, even if you are already familiar with KERN
balances.
4.2 Personnel training
The appliance may only be operated and maintained by trained staff.
The installation and maintenance must only be carried out by a well acquainted
specialist with the workings of weighing balances.
5 Transport and storage
5.1 Testing upon acceptance
When receiving the appliance, please check packaging immediately, and the appliance
itself when unpacking for possible visible damage.
5.2 Packaging / return transport
Keep all parts of the original packaging for a possibly required
Only use original packaging for returning.
Prior to dispatch disconnect all cables and remove loose/mobile
Reattach possibly supplied transport securing devices.
Secure all parts against shifting and damage.
6
return.
parts.
(www.kern-sohn.com
TKBP-V20-A-IA-e-2310
with regard to the