KERN IFB-BA-e-1012 Operating Instructions Manual page 18

Optical signal:
Three colour pilot lamps indicate whether load is within the two tolerance limits.
The signal lamps provide the following information:
+
-
Settings for tolerance weighing may be set either by calling up menu block "P0 CHK"
(See chpt. 8) or by applying the faster option of pressing the key combination
Settings
Press and
Press ; the display used for entering the lower limit
appears.
Press ; current setting appears.
Use the navigation keys (See chpt. 2.1.1) for entering the
lower limit, e. g. 1000 kg; the currently active digit will be
flashing.
Confirm input by
Select using
SET H
18
Goods to be weighed above tolerance limit
Goods to be weighed within tolerance range
Goods to be weighed below tolerance limit
at the same time in weighing mode.
.
Red signal lamp
glowing
Green signal lamp
glowing
Red signal lamp
glowing
SET L
IFB-BA-e-1012