Introduction; List Of Parts; Alternate Cabling - Norac UC5 Installation Manual

1 Introduction

The Trimble FMX Display Kit Manual is intended to be used in conjunction with the UC5 Spray
Height Control Installation Manual. This manual provides instructions to interface the UC5
Control Module to the Trimble FMX Display. For installation of the rest of the UC5 Spray
Height Control System please refer to the sprayer specific manual provided with the kit.
1.1

List of Parts

Item Part Number
C25 44602-01
C26 43240-26
C40 43260-30
C41 43220-03
E12 43764
M01 UC5-BC-MANUAL-ECHO-VT
M04 54VT-TB-FMX-INST
Trimble FMX version must be 8.0 or higher.
Trimble part numbers are subject to change without notice.
1.2

Alternate Cabling

If the control module is mounted on the sprayer of a pull-type sprayer (non-ISOBUS ready
tractor) (Section 2.2.3), cable C42 is required to replace C40. This cable can be ordered from
NORAC.
Item Part Number
C42 43260-29
2
Name
BOX SWITCH UC4 REMOTE HAND CONTROL VER.1 RMR
CABLE UC5 INTERFACE SWITCH BOX
CABLE UC5 INTERFACE DTM 4 PIN 12 IN STUB
CABLE UC5 NETWORK 14 AWG 3M
UC5 NETWORK COUPLER 2-WAY
MANUAL UC5 OPERATORS - ECHO/VT
MANUAL UC5 DISPLAY KIT TRIMBLE FMX
Name
CABLE UC5 INTERFACE DT 4 PIN 12 IN STUB
Quantity
1
1
1
1
1
1
1
Quantity
1