Table of Contents
Advertisement
How to Change DDC Modes
The TLX10 and TLX20 have no LCD or Navigation buttons, therefore the MGMT Port must
be used to change DDC modes.
1. Connect an active Ethernet cable to the module's MGMT Port.
2. Open a Telnet session to the CATx Extender using PuTTY (an SSH and Telnet Client available for
Linux and Windows). PuTTY is an open source program, downloaded for free at www.putty.org.
3. The login ID and Password are both admin
TLX CATx Extension Products Manual
thinklogical
®
Page 26
Rev. B, August 2016
Advertisement
Table of Contents
Need help?
Do you have a question about the TLX20 and is the answer not in the manual?
Questions and answers