Table of Contents
Advertisement
For more information about cabling these devices, see the documentation that
comes with the LC-LC fibre-channel cable.
Figure 34. LC-LC fibre-channel cable
Note: If you are connecting the FAStT100 to a 1 Gbps device (such as a 1 Gbps
Connecting an LC-LC cable to an SFP module
Complete the following steps to connect an LC-LC fibre-channel cable to an SFP
module:
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v Do not remove the covers. Removing the covers of the laser product could
v Use of controls or adjustments or performance of procedures other than
DANGER
1. Read the information in "Handling fiber-optic cables" on page 39.
44
IBM TotalStorage FAStT100 Storage Server: Installation, User's, and Maintenance Guide
FC switch), you must also use an LC-SC fibre-channel cable adapter. For
more information about using an LC-SC fibre-channel cable adapter, see
"Using LC-SC fibre-channel cable adapters" on page 46.
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
those specified herein might result in hazardous radiation exposure.
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
Advertisement
Table of Contents
