Removing The Battery Latch Assembly - Dell XPS M1710 Service Manual

Back to Contents Page
Battery Latch Assembly
Dell™ XPS™ M1710 Service Manual

Removing the Battery Latch Assembly

Replacing the Battery Latch Assembly
Removing the Battery Latch Assembly
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see
Computer) before working inside the computer.
1. Follow the instructions in
2. Remove the hinge cover (see
3. Remove the keyboard (see Keyboard).
4. Remove the display assembly (see
5. Remove the palm rest (see
6. Remove the system board (see
7. Remove the hard drive bay/ExpressCard cage assembly by removing the two remaining M2 x 3-mm screws, and lifting
out the bay.
NOTE: You can remove the hard drive bay without removing the ExpressCard cage from the hard drive bay.
1 hard drive bay
Before Working Inside Your
Removing the Hinge
Removing the Display
Removing the Palm
Removing the System
2 ExpressCard cage
Computer.
Cover).
Assembly).
Rest).
Board).
3 M2 x 3-mm screws (2)
Before Working Inside Your