Removing The Battery Latch Assembly; Replacing The Battery Latch Assembly - Dell Studio 1745 Service Manual

Back to Contents Page
Battery Latch Assembly
Dell Studio™ 1745/1747 Service Manual
Removing the Battery Latch Assembly
Replacing the Battery Latch Assembly
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Battery Latch Assembly
1. Follow the procedures in
2. Remove the subwoofer assembly (see
3. Remove the three screws that secure the battery latch assembly to the computer base.
4. Using a small screwdriver, remove the latch spring on the battery latch assembly.
5. Lift the battery latch assembly out of the computer base.
1 screws (3)
3 latch spring
Replacing the Battery Latch Assembly
1. Follow the procedures in
2. Place the battery latch assembly on the computer base.
3. Using a small screwdriver, place the latch spring over the hook on the computer base.
4. Replace the three screws that secure the battery latch assembly to the computer base.
5. Replace the subwoofer assembly (see
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Subwoofer
2 battery latch assembly
Before You Begin.
Replacing the Subwoofer
UserManuals.info
Removing the
Assembly).
Assembly).
Battery) before working inside the