Removing The Battery Latch Assembly; Replacing The Battery Latch Assembly - Dell Inspiron N4020 Service Manual

Back to Contents Page
Battery Latch Assembly
Dell™ Inspiron™ N4020/N4030 Service Manual
Removing the Battery Latch Assembly
Replacing the Battery Latch Assembly
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
surface (such as a connector on the back of the computer).
CAUTION:
is not covered by your warranty.
CAUTION:
computer.
Removing the Battery Latch Assembly
1. Follow the instructions in
2. Follow the instructions from
3. Remove the I/O board (see
4. Press and push the plastic clips on battery release latch to release it from the battery latch assembly.
5. Using a small screwdriver, remove the latch spring on the battery latch assembly.
6. Slide the battery latch assembly to the side and remove it from the computer base.
1 battery latch assembly
3 latch spring
Replacing the Battery Latch Assembly
1. Follow the instructions in
2. Slide the battery latch assembly into place.
3. Using a small screwdriver, place the latch spring over the hook on the battery latch assembly.
4. Push the plastic clips on the battery release latch into the hole on the battery latch assembly to secure the battery release latch.
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
step 2 to step 13 in Removing the System
Removing the I/O Board).
2 plastic clips
Before You Begin.
UserManuals.info
Removing the Battery) before working inside the
Board.