Replacing The Usb Port Board - Dell XPS M1710 Service Manual

1 USB port board
4 USB-port-board cable
7 pin

Replacing the USB Port Board

1. Insert the notch on the USB port board under the small tab on the computer base and the other side of the board over
the pin.
2. Replace the M2.5 x 5-mm screw.
3. Reconnect the cable to the system board.
4. Replace the palm rest (see
5. Replace the display assembly (see
6. Replace the keyboard (see Keyboard).
7. Replace the hinge cover (see
Back to Contents Page
2 M2.5 x 5-mm screw
5 system board connector
Replacing the Palm Rest).
Replacing the Display
Replacing the Hinge Cover).
3
6
Assembly).
notch
tab