Dell XPS M1710 Service Manual page 43

4. Turn the computer top-side up.
5. Remove the hinge cover (see Removing the Hinge Cover).
6. Use the pull-tab to disconnect the display cable from the system board, and then disengage the display cable from the
cable channel.
7. Disconnect the LED cable from the system board.
8. Remove the four M2.5 x 5-mm screws (two on each side) that connect the display to the computer base.
1 display cable in cable 2 display cable pull-tab 3 M2.5 x 5-mm screws