Table of Contents
Advertisement
Back to Contents Page
Battery Latch Assembly
Dell™ Inspiron™ 1545 Service Manual
Removing the Battery Latch Assembly
Replacing the Battery Latch Assembly
CAUTION:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE:
as a connector on the back of the computer).
NOTICE:
computer.
NOTICE:
covered by your warranty.
Removing the Battery Latch Assembly
1. Follow the instructions in
2. Remove the system board (see
3. Squeeze the plastic clip to release the battery latch assembly.
4. Remove the spring from the hook that holds it in place.
5. Lift the assembly out of the computer base.
1
battery latch assembly
3
spring
Replacing the Battery Latch Assembly
1. Place the latch assembly in the channel on the computer base.
2. Using a small screwdriver, place the spring over the hook on the computer base.
Ensure that the newly installed latch moves smoothly and freely when pushed and released.
NOTICE:
damage to the computer.
3. Replace the system board (see
Back to Contents Page
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
To help prevent damage to the system board, remove the main battery (see
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not
Before Working Inside Your
Removing the System
2
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
Replacing the System
UserManuals.info
Before Working Inside Your
Computer.
Board).
plastic clip
Board).
Computer) before working inside the
Advertisement
Table of Contents
