Dell XPS M1710 Service Manual page 39

18. Remove the video card/thermal-cooling assembly, if present (see
Assembly).
NOTE: Remove the video card/thermal-cooling assembly as a single unit. Do not separate the thermal-cooling
unit (heat sink) from the video card.
19. Remove the processor thermal-cooling assembly (see
20. Remove the processor (see
21. Remove the docking frame:
a. Remove the remaining docking-frame screw.
b. Lift the docking frame away from the system board.
1 docking frame
22. Remove the four M2.5 x 5-mm screws from the system board.
Removing the Processor
2 docking frame screw
Removing the Video Card/Thermal- Cooling
Removing the Processor Thermal-Cooling
Module).
Assembly).