Removing The Usb Port Board - Dell XPS M1710 Service Manual

Back to Contents Page
USB Port Board
Dell™ XPS™ M1710 Service Manual

Removing the USB Port Board

Replacing the USB Port Board
Removing the USB Port Board
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see
Computer) before working inside the computer.
1. Follow the instructions in
2. Remove the hinge cover (see
3. Remove the keyboard (see Keyboard).
4. Remove the display assembly (see
5. Remove the palm rest (see
6. Disconnect the USB-port-board cable connector from the system board.
7. Remove the M2.5 x 5-mm screw, and lift the board out of the computer.
Before Working Inside Your
Removing the Hinge
Removing the Display
Removing the Palm Rest).
Computer.
Cover).
Assembly).
Before Working Inside Your