Advertisement
Available languages
Available languages
Operation
7.3
Front panel buttons and LEDs
12
Siemens Building Technologies
Fire Safety & Security Products
Search button
When in the live mode, pressing the
RW (Rewind) button
Pressing the
button plays video backward at high speed. Pressing the button
RW
again toggles the playback speed from
and
respectively.
Previous button
Pressing the
button goes to the previous image.
Previous
Play/Pause button
Pressing the
button plays back images at regular speed. Pressing the
Play/Pause
button while in the Playback mode pauses the video. The screen displays
the DVR is playing back video. The screen displays when in the Pause mode.
Next button
Pressing the
button goes to the next image.
Next
FF (Fast Forward) button
Pressing the
button plays video forward at high speed. Pressing the button
FF
again toggles the playback speed from
and
respectively.
Zoom button
Pressing the
button zooms the current image on the screen. A PIP with a
Zoom
rectangle temporarily displays showing what area of the screen has been enlarged.
You can use the arrow buttons to move the rectangle to another area. Pressing the
Enter button toggles the zoom size between 2x, 3x and 4x.
Camera
Pressing the individual camera buttons will cause the selected camera to display full
(1-8/16)
screen. Buttons 1 to 9 are also used to enter passwords.
PTZ
Pressing the
PTZ
control properly configured cameras.
Sequence
When in the live mode, pressing the
sequentially. When in one of the multi-view formats, pressing this button will cause the
DVR to sequence cameras in two sequence modes: "Page" and "Cameo". In the Page
mode, the DVR sequences through user-defined screen layouts (pages). In the Cameo
mode, the bottom, right screen to display live cameras sequentially. Pressing the
button while in the Sequence mode will exit the Sequence mode. The button
Sequence
is also used for Zoom Out while in the PTZ mode.
Freeze
Pressing the
Freeze
copying can be done instantly by pressing and holding the button for two or more
seconds. The button is also used for Near Focus in the PTZ mode.
Alarm
The
Alarm
button has two functions. First, it will reset the DVR's outputs including the
internal buzzer during an alarm. Second, it will display the event log when you are in the
live monitoring mode unless there is an active alarm. This operation can be user
password protected. The button is also used for Far Focus while in the PTZ mode.
Spot
Pressing the
Spot
Spot Monitors. After selecting the monitor you can opt to have that Spot Monitor displays
a single camera or all cameras sequentially. The infrared remote control allows you to go
directly to the individual Spot Monitor menus. The button is also saves Presets in PTZ
mode.
button enters the Triplex mode.
Search
,
and
,
and
button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to
Sequence
button displays another full live channel
button freezes the current live screen. In the Search mode clip-
button allows you to select which cameras will display on the four
. The screen displays
when
. The screen displays
12.2008
,
,
EN
Advertisement
Chapters
