Table of Contents
Advertisement
Below conditions may cause malfunctions. Adjust view angle
Note
and [AUTO LEVEL] in the menu setting, etc. in case of
malfunctions:
- when the sensor part is hidden
- when the sensor part is exposed to strong light
- when brightness of the subject and the sensor part differ
drastically.
Checking after Operation
A light shielding cushion is attached to the lens so that the lens is not
exposed to infrared light directly. After adjustment, when attaching the
lens cover, make sure that the light shielding cushion is attached
correctly with the taper (tilted) side facing up (refer to the figure below).
If the light shielding cushion is not attached correctly or deformed,
infrared light reaches to the lens, causing the recorded images to look
shiny white.
Light shiedling cushion
<Light shielding cushion attached
correctly>
Sensor part
Light shiedling cushion
Setting/Adjustment
Taper (tilted)
E-25
Advertisement
Table of Contents
