Table of Contents
Advertisement
PRIVACY MASK Screen
This function allows you to set and mask the parts on the screen that
you do not wish to shoot so that they are not recorded.
For details, refer to "Setting the Privacy Mask" (A page 42).
BRIGHTNESS
Sets the brightness of the part of the image that was masked. The
smaller the value, the darker the image. The larger the value, the
brighter the image.
[Setting values : 0 to 10 to 15] (Default value: 10)
MASK No.1-4
[Setting values : OFF, ON] (Default value: OFF)
Memo Privacy mask can be individually set for each number. Up to
four masked areas can be set. Set to "ON" and press the
[SET] button to display the mask setting screen.
MAINTENANCE Screen
CCD SPOT CORRECTION
Compensates for white spots on the CCD. Press the [SET] button to
display the items for selection.
[Items for selection : CANCEL, EXECUTE]
CANCEL : Returns to the MAINTENANCE screen.
EXECUTE : Executes white spot compensation on the CCD.
Memo Attach the lens cap before executing white spot compensation
on the CCD. Also, turn on the power for 30 minutes to warm
up the camera before execution.
FACTORY SETTINGS
The values set on the menu screen are returned to the default settings.
Press the [SET] button to display the items for selection.
[Items for selection : CANCEL, CLEAR(W/O TITLE), CLEAR(ALL)]
CANCEL
CLEAR(W/O TITLE) : Returns setting values except for CAMERA
CLEAR(ALL)
: Returns to the MAINTENANCE screen.
TITLE to the default.
: Returns all setting values to the default.
Menu Setting
E-37
Advertisement
Table of Contents
