JVC TK-C8301RU Instructions Manual page 27

Error display
If auto white balance adjustment is not successful, the following
messages will appear on the monitor.
AWC ERROR : NG (Subject error)
Displayed when there is not enough white color on the subject or the
color temperature is not suitable.
Fill the screen with a white object thoroughly and adjust the white
balance again.
AWC ERROR : LOW LIGHT (Insufficient illumination)
Displayed when the light is low. Increase the illumination, then readjust
the white balance.
AWC ERROR : HIGH LIGHT (Excessive illumination)
Displayed when the light is too bright. Decrease the illumination, then
readjust the white balance.
AWC ERROR : TIME OVER (Subject movement)
Displayed when the subject moves. Keep the subject still, then readjust
the white balance.
Setting/Adjustment
E-27