Table of Contents
Advertisement
Setting Examples
Settings in Dark Locations (Continued)
Changing the level of brightness to switch the images (Color/
black and white)
[AUTO LEVEL] in [DAY/NIGHT] is set to "NORMAL" in default. Change
the setting by comparing below values and the "NORMAL" setting, and
selecting the appropriate value.
Setting values
BRIGHT
DARK
Switching the images (Color/black and white) from the external
device
When the [AUX FUNCTION] in the menu setting is set to "IN:D/N",
switching in between color images (IR LED light off) and black and
white images (IR LED light on) by the signals input to the AUX terminal.
IR LED won't turned on if the [IR LED MODE] in menu
Memo
setting is set to "OFF".
E-44
Suitable when the images need to be switched
(Color/black and white) in brighter conditions as
compared to the "NORMAL" setting.
Suitable when the images need to be switched
(Color/black and white) in darker conditions as
compared to the "NORMAL" setting.
Contents
Advertisement
Table of Contents
