Download Print this page

Advertisement

HD IP CAMERA
VN-T16U
Thank you for purchasing this product.
Before operating this unit, please read the "INSTRUCTIONS", "QUICK
GUIDE" and "SAFETY PRECAUTIONS" carefully to ensure the best
possible performance.
INSTRUCTIONS
LST1363-001B

Advertisement

   Related Manuals for JVC VN-T16U

   Summary of Contents for JVC VN-T16U

  • Page 1

    HD IP CAMERA VN-T16U INSTRUCTIONS Thank you for purchasing this product. Before operating this unit, please read the "INSTRUCTIONS", "QUICK GUIDE" and "SAFETY PRECAUTIONS" carefully to ensure the best possible performance. LST1363-001B...

  • Page 3: Table Of Contents

    Contents   Contents of this manual ..................2   Cautions and Warnings ..................2   FCC Compliance Statement ................3   AVC and MPEG-4 Visual Patent Portfolio License ..........4   AVC Patent Portfolio License ................ 4   MPEG-4 Visual Patent Portfolio License ............4  ...

  • Page 4: Contents Of This Manual

    Contents of this manual  Windows, Internet Explorer, DirectX and FAT32 are registered trademarks of Microsoft Corporation in the U.S.  Pentium is a registered trademark of Intel Corporation in the U.S.  NVIDIA and GeForce are trademarks or registered trademarks of NVIDIA Corporation in the U.S.

  • Page 5: Fcc Compliance Statement

    Connect only one camera to the power line, AC24V/DC12V. Do not share the power line with other Caution equipment. The power cable between power source and the camera must be under 3 m. When powering the camera from AC24V, a UPS source Caution should be considered to ensure satisfactory performance.

  • Page 6: Avc And Mpeg-4 Visual Patent Portfolio License

    AVC and MPEG-4 Visual Patent Portfolio License AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS...

  • Page 7: About This Document

    1 About This Document This INSTRUCTIONS is designed to be a reference tool for the installation and operation your system including the camera’s features, functions and detailed explanation of the menu tree. Overview of Contents This document contains the following chapters: ...

  • Page 8: Product Overview

    2 Product Overview Camera Parts and Definitions Camera Overview Camera Parts and Definitions Safety Wire(Fall Prevention Wire, not provided) Lens is not provided.

  • Page 9

    1. CS mount: connect the lens with the camera 2. Screw: lock Back focus Adjustment 3. Back focus Adjustment 4. Base: connect the camera with the tripod 5. SD card slot: insert a SD card into this slot for recording and storage 6.

  • Page 10: Installation And Connections

    3 Installation and Connections This chapter describes the installation and connection of the Box Camera. Before You Begin Please read this INSTRUCTIONS carefully before you install and operate the camera. Unpack Everything  HD IP Camera  WARRANTY CARD  SAFETY PRECAUTIONS ...

  • Page 11

    When using AC24V power supply, do not connect the AC24V cable to commercial power supply. If it is connected by mistake, the internal circuit may be damaged. Do not use the camera and make sure to send it to the nearest JVC dealer for inspection. Real time clock ...

  • Page 12: Camera Installation

    Camera Installation All the installation and operations here should conform to your Note local electricity safety rules. Checking Unpacked Camera When you receive the camera from the shipping agency, please check whether there is any visible damage to its appearance. The protective materials used for the package of the camera can protect most accidental clashes during transportation.

  • Page 13: Network Camera Diagram

    Network Camera Diagram Connection type1: Connection type 2: Hardware and Software Requirements Computer Windows XP or Windows 7 as OS Internet Explorer Version 6.0-9.0 CPU: Intel Pentium 4 2.4 GHz or equivalent AMD Memory: 1G or above Display adapter Support DirectX9 for example NVIDIA GeForce 6 Series above ATI Mobility Radeon 9500 above.

  • Page 14: Connecting The Camera To A Personal Computer

    4. Start Internet Explorer and enter IP address: 192.168.0.2). A login window will appear. Enter the default user name: admin and password: jvc to log Figure 3-1 Log on Screen 5. Images of the camera can be viewed through Internet Explorer. Before viewing, follow these steps to enable the display.

  • Page 15

    b. When a proxy server is used, click Internet Options on the Tools menu of Internet Explorer, select Connect tab, click LAN button, and set proxy server. c. Change Security in Internet options as shown below:  On tool menu, click Internet Option. ...

  • Page 16

     Click【Tools】【Internet Options】【Security】【Custom level】  Modify the configuration of IE’s security setting as follow: 【Download signed ActiveX controls】 Prompt (recommended) 【Download unsigned ActiveX controls】 Prompt 【Initialize and script ActiveX not marked as safe for scripting】 Prompt...

  • Page 17

    【Automatic prompting for ActiveX controls】 Enable 【Run ActiveX controls and plug-ins】 Enable 【Script ActiveX controls marked safe for scripting*】 Enable 6. Type your setting IP address into the browser. 7. Then you should be able to see the camera image screen.

  • Page 18: Verview Of Navigation And Controls

    4 Overview of Navigation and Controls Live View Live view is designed for general users to control the camera. In the left list it displays:  Full Screen: Set Full screen  One shot: take a picture from live view ...

  • Page 19: Image Parameters

    Image Parameters You can setup Basic Setting, Image Compression, Alarm, FTP, E-mail, SD. Recording and Audio for your network IP camera by clicking on network setting on setting menu Basic Figure 4-1 Basic...

  • Page 20

    Image Color Automatic Exposure Figure 4-2 Automatic Exposure Automatic Exposure controls the light intensity of picture. There are four types for adjustment. You can select Manual, AES (Automatic Electronic Shutter), Flicker-free 50Hz and Flicker-free 60Hz for the camera depending on your application conditions.

  • Page 21

    Figure 4-4 Brightness adjustment, Contrast, Saturation Shutter Speed Figure 4-5 Shutter Speed Set desired Shutter Speed from 1/25s to 1/10000s. When video type is PAL,the Shutter Speed can be set at 1/25, 1/50, 1/100, 1/120, 1/150, 1/200, 1/300, 1/500, 1/750, 1/1500, 1/5000 and 1/10000s. When video type is NTSC,the Shutter Speed can be set at 1/30, 1/60, 1/100, 1/120, 1/150, 1/200, 1/300, 1/500, 1/750, 1/1500, 1/5000 and 1/10000s.

  • Page 22

    R Gain, B Gain & D Gain Figure 4-8 R Gain, B Gain & D Gain Set manual gain value of R Gain, B Gain, and D Gain from 0 to 255. This function is applied for manual lens only. The red(R) gain is used to adjust the red color of the viewing image.

  • Page 23: Compression

    Back Light Compensation is a function that achieves the brightness of whole area to an optimum image level. Due to the intense light coming from the back of objects in the area expected to view, areas desired to see become dark and invisible.

  • Page 24

    The user interface of Encoder No.1 is as follows: Figure 4-13 Encoder No. 1 Table below elaborates the above figure. Table 4-1 Compression Compression Item Function Choice Remark Encoder No.1 MJPEG Compression Set a default compression mode. MPEG4 Format H.264 1080P 720P 1080P is the highest resolution and,...

  • Page 25

    Variable bit rate Choose the Bit Rate control Rate control mode selection based on user requirements. Constant bit rate Customized mode Low: this setting produces highest image quality while the file size Compression Mid-low increases. Ratio Standard High: this setting produces lowest Mid-high image quality while the file size High...

  • Page 26

    The user interface of Encoder No.2 is as follows: Figure 4-14 Encoder No.2 Table below elaborates the above figure. Table 4-2 Compression Compression Item Function Choice Remark Encoder No.2 MJPEG MPEG4 Compression Set H.264, MJPEG or MPEG4 as a Format default compression mode.

  • Page 27

    variable bit rate Rate control Choose the Bit Rate control selection mode based on user requirements. constant bit rate Customized mode Low: this setting produces highest image Compression Mid-low quality while the file size increases. Ratio Standard High: this setting produces lowest image Mid-high quality while the file size decreases.

  • Page 28

    Table 4-3 Compression correlations of resolution and stream...

  • Page 29

    Table 4-4 Lower frame rate limitation for H.264 and MPEG4 When choosing CBR, some conditions will be disabled based on different resolution setting.  Bit Rate vs Frame Rate (Resolution=1080P, 720P) Frame rate Bit Rate 512K 256K Bit Rate vs Frame Rate(Resolution<=D1) Frame rate Bit Rate 512K...

  • Page 30: Mask Zone

    Mask Zone  Enable button “ON”, then click “Set Mask Zone” to start mask setting.  Use mouse to drag a mask rectangle on the screen, click “OK” to complete the selection.  Click “Save” to enable the mask setting. Figure 4-15 Mask Zone Note: Max 4 masks can be set on the screen.

  • Page 31: Alarm

    Alarm External Digital Input 1 When alarm input is connected, the camera triggers an alarm only when the normal state (open or closed) changes. Connect external devices such as sirens or flashing lights to the alarm output connector to signal users of the camera that an alarm is activated.

  • Page 32: Sd Recording

    Figure 4-18 Alarm Output Figure 4-19 Output Hold Time Please click the “Save” button to save your settings. You can also click the left button “Reset to Default” to set all the data and Note options as defaults. SD Recording Confined SD recording priority: alarm >...

  • Page 33

    Users can choose recording conditions between Event and Network Loss. When users select “Event”, 2 more selections will be effective and Recording Time can be selectable in 5s, 10s, 15s, 20s, 25s, 30s, 35s, 40s, 45s, 50s, 55s or 60s. SD Free Capacity It shows the free capacity of the SD card.

  • Page 34: E-mail Notification

    E-mail Notification You can receive alarm and motion information by setting your E-mail account. Conditions Figure 4-21 Conditions You can choose the form of the E-mail Notification of Alarm and Motion, but if choosing “Motion”, should set Motion Detection as “on” in Alarm settings. And if choosing “Alarm”, should set Alarm Input as “Alarm Input”...

  • Page 35

    E-mail Server (SMTP): Enter your outgoing mail server (SMTP). E-mail User ID: Input your E-mail account ID number. Password: Input your E-mail account password. Password (Confirm): Confirm your E-mail password. Administrator E-mail Address: Input the E-mail address which you want the email to be sent to.

  • Page 36: Audio

    Audio You can set up your audio setting by enabling audio input and output. Figure 4-27 Audio Settings                     Audio Input  Audio Input: Set to "ON" when receiving audio from a Line in connected to the camera.

  • Page 37

    When enabled audio output to “ON”, there are audio issue of the sound is disconnected under a few part of Windows 7 environments. In order to solve audio issue, we suggest to you change a driver settings as follows. 1. Jumbo Frame -->...

  • Page 38: Network Settings

    Network Settings Basic Basic Figure 4-30 Network basic Network  IP Address: Input your IP address here when you select “Manual”.  Subnet Mask: Please use default number: 255.255.255.0. If the subnet mask is not properly configured, the camera may not be able to communicate with other devices on the network.

  • Page 39: Ftp Server

    ID>:<Password>@<ip-address> in Windows Explorer, then you will find the SD recording result. The original setting is ftp://admin:jvc@192.168.0.2 When you’re visiting the SD recording files, date and time of record refers to the folder’s and file’s name. Figure 4-31 FTP Sever Settings Please click the “Save”...

  • Page 40: Https

    Figure 4-32 Authentication Multicast Address You could choose the value from 224.0.0.23 to 239.255.255.254. Figure 4-33 Multicast Address Encoder No.1 & Encoder No.2 Encoder No.1 & Encoder No.2 Figure 4-34 Please choose desired options and value and remember to click “save” button to save all your settings.

  • Page 41: Admin Function

    ID and password controller. However, User1~5 are allowed to review the live picture only. Without authorization, any operation will be forbidden.  The default guest’s login name and password are “user” and “jvc”.  Enter a guest’s User ID in the User ID field. ...

  • Page 42: Date/time

    Finally, click Save to save the settings. Figure 4-38 Reset Date/Time Set Display and Synchronization Mode Figure 4-39 Date and Time   The user can choose Synchronization Mode here from three different types. Set Date and Time Manually Set up the camera’s date and time in the Set Date and Time Manually field. Figure 4-40 Set Date and Time Manually  ...

  • Page 43: Update

    Daylight Saving Select “ON” to activate the daylight-saving function if you are in a daylight saving time zone (effective for NTP mode only), and then choose the starting time ,ending time and time adjustment. Please click the “Save” button to save your settings. You can also click the left button “Reset to Default”...

  • Page 44: Set To Factory Default

    Import Configuration Settings This function is designed to upload configuration setting from the client computer to network cameras. Figure 4-45 Import Configuration Settings   Export Configuration Settings This function is designed to export configuration settings to the client computer. Figure 4-46 Export Configuration Settings  ...

  • Page 45: Event Log

    Event Log Click the buttons to display the desired logbooks or to delete all logs. Figure 4-49 Log Browse This window is sample Information FW version and MAC address will be shown. Figure 4-50 FW version and MAC address Displayed numbers are different in each camera.

  • Page 46: Miscellaneous

    Miscellaneous Click the button. This camera contains free open source code. Figure 4-51 Miscellaneous Free Open Source Software Software information regarding these products, Model No. VN-T16, VN-T16U, VN-T216, VN-T216U, VN-T216VPRU - SOFTWARE LICENSE AGREEMENT - Important Notice concerning the Software The Software contained in this product, among others, consists of the following software: (1) the software which is developed by or for JVC KENWOOD Corporation;...

  • Page 47

    ************************************************************************* * Copyright (c) University of Delaware 1992-2011 * Permission to use, copy, modify, and distribute this software and * its documentation for any purpose with or without fee is hereby * granted, provided that the above copyright notice appears in all * copies and that both the copyright notice and this permission * notice appear in supporting documentation, and that the name * University of Delaware not be used in advertising or publicity...

  • Page 48

    31. [34]Craig Leres <leres@ee.lbl.gov> 4.4BSD port, ppsclock, Magnavox GPS clock driver 32. [35]George Lindholm <lindholm@ucs.ubc.ca> SunOS 5.1 port 33. [36]Louis A. Mamakos <louie@ni.umd.edu> MD5-based authentication 34. [37]Lars H. Mathiesen <thorinn@diku.dk> adaptation of foundation code for Version 3 as specified in RFC-1305 35.

  • Page 49

    LICENSE ISSUES ============== The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org.

  • Page 50

    * All rights reserved. * This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). * The implementation was written so as to conform with Netscapes SSL. * This library is free for commercial and non-commercial use as long as the following conditions are adhered to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code;...

  • Page 51

    SOFTWARE LICENSE AGREEMENT The software embedded in the Product (hereinafter the "Licensed Software") provided by JVC KENWOOD Corporation is copyrighted to or sublicensable by JVC KENWOOD Corporation, and this Agreement provides for the terms and conditions which Users shall follow in order to use the Licensed Software.

  • Page 52

    Any and all copyrights and other rights pertaining to the Licensed Software and related documents shall belong to JVC KENWOOD Corporation or the original holder of the right who granted to JVC KENWOOD Corporation the license or sublicense for the Licensed Software (hereinafter the "Original Rightholder"), and the User shall not be entitled to any right other than the license granted hereunder, in respect of the Licensed Software and any related documents.

  • Page 53

    JVC KENWOOD Corporation. Article 8 Termination In case the User falls under any of the events described in the following items, JVC KENWOOD Corporation may immediately terminate this Agreement or claim that the User compensates for the damage incurred by JVC KENWOOD Corporation due to such event: (1) when the User violated any provision of this Agreement;...

  • Page 54

    The entire risk as the quality and performance of these components is with you. Please check the respective license agreement for more details. Ordering website for your GPL/LGPL Source Code http://www3.jvckenwood.com/english/download/gpl/ (JVC KENWOOD Corporation English website) (c) 2012 JVC KENWOOD Corporation...

  • Page 55: Specifications

    5 Specifications Operational Specifications Image device 1/2.7-type Mega-pixel CMOS sensor Sensitivity Color: 0.6 lx, B/W: 0.6 lx (50% F1.2) Day/Night Easy D/N Auto Gain Control Off/On, selectable Auto Iris Control AES (Automatic Electric Shutter) White Balance ATW (2800K~8500K) and Manual PAL: 1/25~1/10000 sec Electric Shutter NTSC: 1/30~1/10000 sec...

  • Page 56

    Network: RJ45 connector Connectors Audio In/out: removable terminal block Alarm In/out: removable terminal block Environmental Operating -10 °C to 50 °C Temperature Operating Humidity 20 % to 90 % (without condensation) Storage Temperature -20 °C to 60°C © 2012 JVC KENWOOD Corporation...

Comments to this Manuals

Symbols: 0
Latest comments: