Specifications - Look Solutions Unique 2.1 Operating Manual

Trouble: E-4 appears on the LED display
Cause: The machine is getting too hot. The heating
switches off and the machine cools down.
Solution: Disconnect the machine from the mains supply
for a moment and then re-connect it.
Trouble: E-8 appears on the LED display
Cause: The vaporizer is clogged.
Solution: Please send the machine to the service-station
or your local dealer.
Trouble: E-1 appears on the LED display
Solution: Please send the machine to the service-station
or your local dealer.
Procedure:
Power requirement:
Voltage:
Warm up time:
Fluid tank capacity:
Internal fan:
Airborne noise emitted:
Haze output:
Haze density:
Haze duration:
Control:
Temperature control:
Overheating protection:
Dimensions (L x W x H):
Weight without canister:
Manufactured for:
Look Solutions - Fog machines made in Germany · Bünteweg 33 · DE - 30989 Gehrden
7. Troubleshooting

8. Specifications

Haze generator without compressor
1500 Watt
120 V/ 60 Hz
approx. 60 seconds
2 litre
>6000 l/min.
>70 dbA
adjustable in 99 steps, 1%-steps
variable
continuous output
DMX 512
0 - 10 V analog
Timer
Stand alone-Mode
Radio remote (option)
XLR-remote (option)
Microprocessor controlled
Heat exchange module with thermal cut-out
18.5 x 9.8 x 9.8 in
19.1 lbs
18
E – 4
E – 8
E – 1