Table of Contents
Advertisement
Understanding the printer menus
Use
PCL Emulation Settings
Auto CR after LF
On
Off
PCL Emulation Settings
Auto LF after CR
On
Off
Tray Renumber
Assign MP Feeder
Off
None
0–199
Assign Tray [x]
Off
None
0–199
Assign Manual Paper
Off
None
0–199
Assign Manual Envelope
Off
None
0–199
Tray Renumber
View Factory Defaults
MPF Default = 8
T1 Default = 1
T1 Default = 4
T1 Default = 5
T1 Default = 20
T1 Default = 21
Env Default = 6
MPaper Default = 2
MEnv Default = 3
Tray Renumber
Restore Defaults
Yes
No
To
Specify whether the scanner automatically performs a carriage return (CR) after
a line feed (LF) control command.
Note: Off is the factory default setting.
Specify whether the scanner automatically performs a line feed (LF) after a
carriage return (CR) control command.
Note: Off is the factory default setting.
Configure the scanner to work with scanner software or programs that use
different source assignments for trays and feeders.
Notes:
•
Off is the factory default setting.
•
None ignores the Select Paper Feed command. This option appears only
when it is selected by the PCL 5 interpreter.
•
0–199 allows a custom setting to be assigned.
•
Some menu settings are available only in select printer models.
Display the factory default setting assigned to each tray or feeder.
Restore all tray and feeder assignments to the factory default settings.
232
Advertisement
Table of Contents
