Table of Contents
Advertisement
Additional scanner and printer setup
b
Push down the tray to secure it on the front hinge.
c
Return the tray to its original position.
Installing an Internal Solutions Port
The system board supports one optional Lexmark Internal Solutions Port (ISP). Install an ISP for additional connectivity
options.
Note: This task requires a flat‑head screwdriver.
CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory
devices sometime after setting up the scanner, then turn the scanner off, and unplug the power cord from the
electrical outlet before continuing. If you have any other devices attached to the scanner, then turn them off as
well, and unplug any cables going into the scanner.
38
Advertisement
Table of Contents
