Multi-Function Meter Unit - Yamaha YZF-R125 Owner's Manual

Multi-function meter unit

Lo
1
OIL OIL
km/h
km/L/100km
MPG MPH
RESET
2
ZAUM1145
1. "INFO" switch
2. "RESET" button
3. "SELECT" button
INSTRUMENT AND CONTROL FUNCTIONS
EAUM3422
1
Hi
1/2
ODO FTRIP
x1000r/min
Lo
OIL
SELECT
3
8
ZAUM1146
1. Coolant temperature meter
2. Tachometer
3. Fuel meter
4. Odometer/tripmeter/fuel reserve tripmeter
5. Clock
6. Error code display
7. Speedometer
8. Multi-function display
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
The multi-function
equipped with the following:
 a speedometer
2 3
1/2
ODO
x1000r/min
km/h
7 6 5 4
EWA12423
meter unit
3-4
 a tachometer
 a clock
 a fuel meter
 a coolant temperature meter
 an odometer and tripmeter display
 a multi-function display
 a self-diagnosis device
TIP
 Be sure to turn the key to "ON" be-
fore using the "SELECT", "RE-
SET" and "INFO" buttons.
 When the key is turned to "ON", all
display segments of the multi-
function meter unit will momen-
tarily appear in order to test the
electrical circuit. The speedome-
ter, tachometer, fuel meter and
coolant temperature meter will
then perform a display check and
a welcome message will scroll
across the multi-function display.
 For the U.K. only: To switch the
speedometer and multi-function
displays between kilometers and
miles, press the "SELECT" and
"RESET" button together, turn the
is
key to "ON" and then release the
buttons. Press the "SELECT" but-
3