Yamaha YZF-R125 Owner's Manual page 51

Cowling C
To remove the cowling
Remove the screws, and then pull the
cowling off as shown.
ZAUM1172
1. Screw
2. Cowling C
To install the cowling
Place the cowling in the original posi-
tion, and then install the screws.
Cowling D
To remove the cowling
1. Remove panel A, cowlings A, B
and C.
PERIODIC MAINTENANCE AND ADJUSTMENT
2. Remove the screws and the quick
fasteners, and then take the cowl-
ing off.
TIP
The quick fastener is removed by
pushing the center pin in with a screw-
driver, then pulling the fastener out.
ZAUM1173
1. Quick fastener
2. Screw
3. Cowling D
To install the cowling
1. Place the cowling in the original
position, and then install the
screws and the quick fasteners.
6-9
TIP
To install the quick fasteners, push the
center pin out so that it will protrude
from the fastener head, insert the fas-
tener into the cowling, and then push
the protruding pin in until it is flush with
the fastener head.
2. Install cowlings C, B, A and panel
A.
Panel A
To remove the panel
1. Remove the rider seat. (See page
3-18.)
2. Remove the screws, and then take
the panel off.
EAUM2371
6