Removing And Installing The Cowlings And Panel - Yamaha YZF-R125 Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Removing and installing the
cowlings and panel
ZAUM1169
1. Cowling A
6
2. Cowling B
3. Cowling C
4. Cowling D
5. Panel A
The cowlings and panel shown need to
be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each time
a cowling or panel needs to be re-
moved and installed.
EAU18732
Cowling A
To remove the cowling
Remove the screws, and then take the
cowling off.
ZAUM1170
1. Screw
2. Cowling A
To install the cowling
Place the cowling in the original posi-
tion, and then install the screws.
Cowling B
To remove the cowling
1. Remove cowling A and panel A.
2. Remove the screws, slide the
EAU55850
3. Disconnect the turn signal light
ZAUM1171
1. Screw
2. Cowling B
To install the cowling
1. Connect the turn signal light lead
2. Fit the projection on the cowling
3. Install the screws.
4. Install cowling A and panel A.
6-8
cowling forward, and then take it
off.
lead coupler.
coupler.
into the slot, and then slide the
cowling backward.