Download  Print this page

Operation And Important Riding Points; Starting The Engine - Yamaha YZF-R125 Owner's Manual

Hide thumbs

Advertisement

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

EAU15952
TIP
This model is equipped with a lean an-
gle sensor to stop the engine in case of
a turnover. In this case, the multi-func-
EWA10272
tion display indicates error code 30,
but this is not a malfunction. Turn the
key to "OFF" and then to "ON" to clear
the error code. Failing to do so will pre-
vent the engine from starting even
though the engine will crank when
pushing the start switch.
EAU48021

Starting the engine

In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
 The transmission is in the neutral
 The transmission is in gear with
1. Turn the key to "ON" and make
5-1
position.
the clutch lever pulled and the
sidestand up.
See page 3-19 for more informa-
tion.
sure that the engine stop switch is
set to " ".
The following warning lights and
indicator lights should come on for
a few seconds, then go off.
 Neutral indicator light
 Turn signal indicator light
 High beam indicator light
 Engine trouble warning light
 Fuel level warning light
 Tachometer high-rpm warn-
ing light
EAUM3530
5

Advertisement

Table of Contents

   Also See for Yamaha YZF-R125

This manual is also suitable for:

Yzf-r125a

Comments to this Manuals

Symbols: 0
Latest comments: