Download  Print this page

Advertisement

INSTRUMENT AND CONTROL FUNCTIONS
 two tripmeters (which shows the
distance traveled since last set to
zero)
 a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
3
on)
Pushing the "SELECT" button switch-
es the display between the odometer
mode and the various tripmeter modes
in the following order:
ODO (odometer) → TRIP 1 (tripmeter)
→ TRIP 2 (tripmeter) → ODO (odome-
ter)
1/2
1
ZAUM1152
1. Odometer/tripmeter/fuel reserve tripmeter
When approximately 3.0 L (0.79 US
gal, 0.66 Imp.gal) of fuel remains in the
fuel tank, the display will automatically
change to the fuel reserve tripmeter
mode "F TRIP" and start counting the
distance traveled from that point. In
that case, pushing the "SELECT" but-
ton switches the display between the
various tripmeter and odometer modes
in the following order:
ODO → TRIP 1 → TRIP 2 → F TRIP (fu-
el reserve tripmeter) → ODO
To reset a tripmeter, select it by push-
ing the "SELECT" button until "TRIP 1,
TRIP 2, F TRIP" is displayed. While
"TRIP 1, TRIP 2, F TRIP" is displayed,
push the "RESET" button for two sec-
onds. The fuel reserve tripmeter will re-
set automatically and disappear after
you have refueled and turned the key
to "OFF".
F TRIP
Multi-function display
ZAUM1153
1. Multi-function display
The multi-function display is equipped
with the following:
 a fuel consumption display (aver-
 an average speed display (which
 a time tripmeter (which shows the
 an oil change indicator with an oil
 a low battery voltage warning indi-
3-7
Hi
Lo
OIL
km/L
age and instantaneous consump-
tion functions)
shows the average speed since
last set to zero)
elapsed riding time since last set
to zero)
service reminder (which shows the
riding distance since last set to ze-
ro)
cator
1

Advertisement

Table of Contents

   Also See for Yamaha YZF-R125

This manual is also suitable for:

Yzf-r125a

Comments to this Manuals

Symbols: 0
Latest comments: