Multi-Function Meter Unit - Yamaha WOLVERINE RMAX2 2024 Owner's Manual

EBU40562

Multi-function meter unit

1 1
2 2
3 3
4 4
7 7
1. D-mode indicator (if equipped)
2. Speedometer
3. Odometer/Tripmeter A/Tripmeter B/Service
tripmeter/Error code display
4. Clock/Hour meter/Voltage display/Coolant temperature
display
5. Fuel gauge
6. Suspension mode indicator (if equipped)
7. "MODE" button
8. "SELECT" button
9. "RESET" button
The multi-function meter unit is equipped with
the following:
 speedometer
5 5
6 6
8 8 9 9
 odometer
 tripmeters
 clock
 hour meter
 voltage display
 coolant temperature display
 fuel gauge
 D-mode indicator (if equipped)
 suspension mode indicator (if equipped)
 brightness control mode
 error code display
Speedometer
The speedometer shows the vehicle's travel-
ing speed. The speedometer can be set to
"MPH" or "km/h". This also changes the
odometer and tripmeter units between miles
and kilometers. To change the display be-
tween "MPH" and "km/h", turn the key
to " " (off), then while holding the "SELECT"
button pushed, turn the key to "
5-7
5
" (on).