Reset Button
The Reset Button connection is located
on pins 3 and 4 of JF1. Attach it to a
hardware reset switch on the computer
case to reset the system. Refer to the
table on the right for pin definitions.
Power Button
The Power Button connection is located
on pins 1 and 2 of JF1. Momentarily
contacting both pins will power on/off the
system. This button can be configured as
4 Seconds Override or Instant Off (with a
setting in the BIOS setting, see Chapter
4). Refer to the table on the right for pin
definitions.
FP PWR LED
NIC1 Activity LED
NIC2 Activity LED
OH/Fan Fail/PWR Fail
(Power Fail LED on PCB 2.00) X
16
15
HDD LED
Ground
Ground
2
1
2-17
Chapter 2: Installation
Reset Button
Pin Definitions (JF1)
Pin#
Definition
3
Reset
4
Ground
Power Button
Pin Definitions (JF1)
Pin#
Definition
1
Signal
2
Ground
A. Reset Button
B. PWR Button
3.3 V
3.3V Stby
3.3V Stby
3.3V Stby
UID LED
3.3V
Reset
Reset Button
Power Button
PWR
A
B