Motherboard Installation; Tools Needed; Location Of Mounting Holes - Supermicro X10SDV User Manual

2-3

Motherboard Installation

All motherboards have standard mounting holes to fit different types of chassis.
Make sure that the locations of all the mounting holes for both motherboard and
chassis match. Although a chassis may have both plastic and metal mounting fas-
teners, metal ones are highly recommended because they ground the motherboard
to the chassis. Make sure that the metal standoffs click in or are screwed in tightly.
Then use a screwdriver to secure the motherboard onto the motherboard tray.

Tools Needed

Philips Screwdriver
(1)

Location of Mounting Holes

A
C
JNVI2C1
SLOT7
PCI-E 3.0 X16
Caution: 1) To avoid damaging the motherboard and its components, please do
not use a force greater than 8 lb/inch on each mounting screw during motherboard
installation. 2) Some components are very close to the mounting holes. Please take
precautionary measures to avoid damaging these components when installing the
motherboard to the chassis.
Philips Screws (4)
VGA
SRW2
LAN3/4
LED8
C
SRW1
BMC
AST2400
C
LEDM1
J21
A
Intel
D-1500
USB 4/5
LED3
A
C JF1 I-SGPIO2
JPME1
i350
LAN1/2
X10SDV-F
REV: 2.00
DESIGNED IN USA
BT1
JBT1
J6
FAN2
I-SGPIO1
JF1:
PWR OH HDD PWR
X NIC2 NIC1
RST
FF LED LED
ON
2-5
Chapter 2: Installation
Standoffs (4)
Only if Needed
JPL1
USB 0/1(3.0)
IPMI_LAN
COM1
USB 2/3
JPI2C1
PJ1
JPW1
FAN1