Installing The Riser 1 Blank; Removing Expansion Card Risers - Dell PowerEdge R730 Owner's Manual

Figure 31. Removing and installing the riser 1 blank
1. slot on the chassis
3. riser 1 blank

Installing the riser 1 blank

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
To install the riser 1 blank, align the blank with the slot on the chassis and insert it into the chassis
until it clicks into place.

Removing expansion card risers

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
88
2. tab (2)