TINE SYSTEM
7. Loosen the set screws on the lock collars (if applic-
able) on both sides of the machine. Insert a pin
punch into the recess in the lock collars and tap until
lock collars come loose (Fig. 145).
8. Loosen and remove the two nuts and bolts, then
remove the lock collar bearings from both sides of
the unit (Fig. 146).
5
5-4
Fig. 145
Fig. 146
9. Remove all of the chain guard bolts (Fig. 147).
38
10. Slide the snap rings on the tine shaft all the way to
the outer stationary spyder (Fig. 148).
39a
Fig. 147
Fig. 148
Toro 21" Aerator Service Manual
40
41