Toro 23515 Service Manual page 40

CHASSIS
5. Adjust the traction drive cable at the handle as
follows:
• Loosen and remove the linkage adjustment from
the bracket (Fig. 046).
• Move the lower nut to the end of the thread (Fig.
046).
Note: Ensure that the bail will reach the handle after
the transmission is engaged.
3
A. Lower nut
3-8
A
Fig. 046 fig. 31 G020485
6. Adjust the reverse speed stop as follows:
• Loosen the 2 nuts on the reverse speed stop (Fig.
047).
• Move the stop down to the midpoint or slightly
past it and tighten the 2 nuts (Fig. 047).
Note: The reverse speed should be around 2.0 MPH
(3.2km/h).
A
Fig. 047
A. Nuts
fig. 32 G020486
Toro 21" Aerator Service Manual