Handle Subsystem - 2014 (Serial 314000001 & Up) - Toro 23515 Service Manual

CHASSIS
Handle Subsystem – 2014 (Serial 314000001 & up)
(Fig. 038)
3
A. Handle
B. Tube - Control
C. Tube - Handle, Lift
1 Do not overtighten leave 1 or 2 threads showing. Handle must still be able to pivot.
2
Push angle stop down as far as possible.
4
With the handle folded, adjust linkage (K) by hand until the ball join on the tine ground engagement lever is
tight against the handle.
5
Adjust cable so when drive handle (B) is at full speed, there is .03-.10" gap between drive handle #2 and
handle #1
7
3-4 threads exposed on the front side of the front nut.
8
Assemble linkage into bottom hole.
9 Assemble handle into middle position on frame.
3-2
1
J
E
7
I
D. Control - Throttle
E. Cable - Drive
F. Bracket - Trunion
A
2
D
F
H
G
G. Lower Handle Asm
H. Link - Lift
I. Ball Joint
B
5
C
4
K
4
8
9
Fig. 038
subsystem handles 1
J. Handle - Lower
K. Rod - Upper Link
Toro 21" Aerator Service Manual