CHASSIS
4. Remove the snap ring and washer from the lift arm
(Fig. 062).
3
5. Loosen the set screws on the lift arm.
Note: There are two set screws (Fig. 063).
3-14
Fig. 062
lift arm snap ring_a
Fig. 063
set screws 1
6. Slide the wheel arm and lift arm off of the shaft (Fig.
064).
Fig. 064
7. On the opposite side, remove the snap rings and
washers from the wheel arm and lift arm (Fig. 065).
Fig. 065
arm removal
wheel & lift arm_a
Toro 21" Aerator Service Manual