Toro 23515 Service Manual page 47

8. Slide the pivot shaft out of the chassis by pulling on
the wheel and lift arm assembly (Fig. 066).
Fig. 066
9. Once the pivot shaft is out, loosen the set screws
on the lift arm and remove the wheel and lift arm
assembly from the shaft. Replace the shaft with new,
inserting it into the wheel and lift arm assembly (Fig.
067).
Fig. 067
Toro 21" Aerator Service Manual
10. Insert the shaft and wheel and lift arm assembly into
the chassis (Fig. 068).
remove pivot shaft_a
11. Guide the pivot shaft through the hole on the
opposite side (Fig. 069).
new shaft_a
CHASSIS
Fig. 068 insert new shaft_a
Fig. 069 pivot shaft hole_a
3
3-15