Toro 23515 Service Manual page 62

HYDRAULICS & ENGINE MOUNTING
8. Remove the lock collar and bearing from the jack
shaft the same way as the output shaft (Fig. 115).
4
9. Loosen the inner lock collar set screw. Insert a pin
punch into the recessed hole of the lock collar and
tap the collar to loosen it from the bearing (Fig. 116).
4-8
Fig. 115
Fig. 116
10. Loosen the set screws on the large sprocket (Fig.
117).
20a
11. Remove the jack shaft from the transmission. The
sprocket is keyed. To remove sprocket from shaft,
insert the assembly into a press and press the
sprocket off (Fig. 118).
21a
Fig. 117
Fig. 118
Toro 21" Aerator Service Manual
22a
23a