4. Loosen the set screws on the lock collar of the
output shaft (Fig. 111).
Fig. 111
5. Insert a pin punch into the recessed hole in the lock
collar. Tap the punch to turn the collar to loosen the
collar (Fig. 112).
Fig. 112
Toro 21" Aerator Service Manual
HYDRAULICS & ENGINE MOUNTING
6. Remove the lock collar (Fig. 113).
16a
7. Remove the bearing from the shaft and the output
shaft from the transmission (Fig. 114).
17a
Fig. 113
Fig. 114
18a
4
19a
4-7