Disassembly Procedures - Yamaha CRX-E500 Service Manual

I DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
Disconnect the power plug from the AC outlet.
1. Removal of Top Cover
a. Remove 4 screws (1) and 4 screws (2) in Fig. 1.
b. Lift the Top Cover at the rear and move it rear-ward
slantingly.
2. Removal of Front Panel Unit
a. Disconnect cable from Connector (CB200) in Fig. 2.
b. Remove 2 screws (3) and 2 screws (4) in Fig. 1.
c. Remove the Front Panel Unit forward in Fig. 1.
3. Removal of CDC Mechanism Unit
a. Remove 1 screw (5) and 5 screws (6) in Fig. 3 and
then remove the CDC Mechanism Unit in Fig. 3.
b. Disconnect cables from Connectors (CB1, CB2, CB3
and CB4) in Fig. 2.
* When installing the CDC Mechanism Unit, make sure
that its tip end has fitted into the cut in the main chassis
securely (confirmed by a clicking sound) before
tightening the screw. This is to prevent it from getting
loose.
Fig. 2
The way to open the drawer
a. Move the lever under the left side face of the mechanism
toward the front side first and then toward the rear side.
The drawer is unlocked and opens by about 5 to 10cm.
(Fig. 4)
1
Front Panel
3
4
CDC Mechanism Unit
CB6
CB1
CB4
CB2
CB3
CB200
Rear
Top Cover
3
Fig. 1
6
6
Fig. 3
1
lever
2
Fig. 4
CDC-E500
2
2
1
5
6
Front
7