Yamaha CRX-E500 Service Manual page 14

CDC-E500
d. While moving the arm stopper B in the arrow direction
(Photo 14), pull the lever toward you (Photo 13) and lift
the arm. (Photo 15)
e. Remove 2 screws fixing the arm and while pulling the
chassis by the part marked with an arrow, remove the
arm. (Photo 15)
f. Remove the carriage located under it as well. (Photo
15)
g. Remove the lifter and spring located on the right side.
Since the front is spring shaped, push this section
inward to release it from the claw of the chassis. (Photo
16)
14
Move the arm stopper B
in this direction.
Slider 1 and 2 move in this direction.
Photo 14
Carriage Arm
2 arm mounting screws.
Photo 15
While pushing this part inward,
lift the lifter to remove it.
Photo 16
Arm stopper B
Pull the chassis.
Lifter Spring