York Fitness G510 Instruction Manual page 6

INSTRUCTION
Ensure the entry point for the SELECTOR PIN (64)
faces towards the left hand side on each of the plates.
Slide each of the 9 x CAST IRON WEIGHT PLATES (61)
down the WEIGHT PLATE POST (6).
Locate the CAST IRON TOP PLATE (62) on top of the
plates ( Ensure that the hole faces towards left ).
Find the M12 x 40mm TOP PLATE FIXING BOLT (63)
& WEIGHT PLATE SELECTOR STEM (8).
While keeping hold of the top of the WEIGHT SELECTOR
STEM (8) slide it down into the middle of the CAST IRON
TOP PLATE (62) & CAST IRON WEIGHT PLATES (61).
Line up the threaded hole on the CAST IRON TOP PLATE (62)
with the threaded hole on the SELECTOR STEM (8).
Insert & tighten the M12 x 40mm FIXING BOLT (63).
ENTRY POINT FOR SELECTOR PIN FACES
63
M12 x 40mm FIXING BOLT x
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
YORK G510 / 04
3
FIXING BOLT
TOWARDS THE LEFT SIDE.
SELECTOR
PIN
1
WEIGHT PLATE
SELECTOR STEM
THREADED HOLE
ON WEIGHT
SELECTOR STEM
CAST IRON
TOP PLATE
CAST IRON
WEIGHT
PLATES
Slide each of the
9 x CAST IRON
WEIGHT PLATES (61)
down the WEIGHT
PLATE POST (6).