Table of Contents
Advertisement
BEFORE ASSEMBLY
BEFORE ASSEMBLY
This must be read before you start assembling this unit.
Great care has been taken in design and how to assemble
this unit. All bags of nuts and bolts have been packed with
ease of assembly in mind. You must follow the assembly
instructions exactly as outlined.
You will need at least one person to help you assemble this
one
unit, two would be better. Assemble this unit starting at the
beginning and work to the end. The assembly instructions are
set out so that you are only doing one section at a time,
therefore you will finish one section and move on to the next.
Do not do what most people do, when all else fails they read
the assembly instructions. If something is missing when
assembling this unit, you must notify us of the part number of
the exact nut, bolt or part that is missing and the colour of
the model you purchased.
To help you assemble this unit we have used line drawings.
Check the images for the exact positioning of the parts.
This unit will need to be checked at least once a week for
wearing wire ropes, nuts and bolts that can work loose,
upholstered pieces working loose and wear on pivot assemblies.
WARNING:
Check wire ropes for wear and tear regularly.
This is for your own safety.
WIRE ROPES DO WEAR OUT!!
WARNING:
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY!!
If the box containing the parts for the
YORK G510 Gym was unopened when you
purchased it and there is a shortage, please notify us by mail and
send a copy of your receipt. If the box was opened and there is
a shortage, the dealer is responsible. Please indicate to us the
part number which is missing and we will return the missing
part by return mail.
TOOLS NEEDED TO ASSEMBLE YORK G510 GYM
TOOLS NEEDED TO ASSEMBLE YORK G510 GYM
a) wrenches :-
2 x 3/4" 19mm
1 x 5/8" 16mm
b) large screwdriver
c) hammer
d) 6mm Allen Key
PLIERS SHOULD NOT BE USED!!
WARNINGS:
WARNINGS:
It is important that you do not destroy these instructions, they
will need to be kept for further reference
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY!!
WARNING:
Maximum user weight 100kg
This machine should be assembled finger tight
in the beginning to allow for proper alignment. This equipment has been supplied with some nylon
locknuts. Once assembly is complete - it is essential that the nuts are fully tightened onto the bolts,
so that the bolts penetrates through the nyloc insert.
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY.
Distributed by:
YORK BARBELL (U.K.) LTD.
YORK WAY, DAVENTRY,
NORTHANTS, NN11 4YB, ENGLAND
GENERAL ENQUIRIES
TEL: (01327) 701800
CUSTOMER SERVICE HELPLINE
TEL: (01327) 701824
FAX: (01327) 706704
E-MAIL: helpdesk@yorkfitness.co.uk
1 X 17mm
1 X 10mm
Distributed by:
YORK FITNESS (TAIWAN) LTD.
4F-A2. No.51
SEC 2, KUANG YI ROAD,
TAICHUNG 408, TAIWAN
GENERAL ENQUIRIES
TEL: +886-4-2319-3448
FAX: +886-4-2319-3449
E-MAIL: yorktwn@ms25.hinet.net
WARNINGS:
WARNINGS:
1. Always consult your doctor before undertaking any
exercise program.
2. Ensure that all nuts and bolts are fully tight before
using any exercise equipment.
3. Always wear suitable clothing and footwear e.g.
tracksuit and training shoes.
4. Children should not be allowed on or around the
machinery or equipment, even when not in use.
5. After eating allow 1 to 2 hours prior to exercising.
6. Always warm up well before exercising as this will
prevent straining muscle.
7. Always read and follow the manufacturers assembly
and user instructions.
8. Remove jewellery, rings, chains and pins before
exercising.
9. Check for full engagement of locking pins.
Ensure that adjustment devices are not left projecting as
10.
they may interfere with people
WARNING: Injuries to health may result from incorrect use
11.
of this equipment. Always correctly follow the instructions that
are set out on the wall chart provided.
Assemble and operate the product on A solid and level surface.
12.
13. Always use your gym in adequate space e.g. at least
2ft. (60cm) clearance on each side and front
( the rear can be close to a wall).
14. We recommend you never lift weights alone. There
should always be someone available to assist you.
Training with others can help motivate you.
N.B. This list should not be taken as exhaustive
Parents and others in charge of children should be aware of their
responsibility, because the natural play instinct and the fondness
of experimenting of children can lead to situations and behaviour
for which the training equipment is not intended.
If children are allowed to use the equipment, their mental and
physical development and above all their temperament should
be taken into account. They should be controlled and instructed
in the correct use of the equipment. The equipment is under no
circumstances suitable as a children's toy.
CARE & MAINTENANCE
CARE & MAINTENANCE
1. Use a warm, damp cloth to keep upholstery clean.
2. Check for full engagement of locking pins.
3.
The safety level of the equipment can be maintained only if it
is regularly examined for damage and wear, e.g. ropes, pulleys,
connection points.
Replace defective components immediately and/or keep
the equipment out of use until repair.
COMPONENTS SUCH AS PULLEYS, BEARINGS AND CABLES
ARE ALWAYS MORE SUSCEPTIBLE TO WEAR.
SPECIAL ATTENTION SHOULD BE TAKEN TO INSPECT
THESE COMPONENTS BEFORE USE.
Distributed by:
YORK BARBELL (AUST.) PTY. LTD.
UNIT 1, LOT 2, SWAFFHAM ROAD
MINTO, N.S.W. 2566
SYDNEY, AUSTRALIA
GENERAL ENQUIRIES
TEL: (02) 9603 8444
FAX: (02) 9603 8555
E-MAIL: service@yorkfitness.com.au
YORK G510 / 01
Hide quick links:
Advertisement
Table of Contents
