York Fitness G510 Instruction Manual page 15

INSTRUCTION
Lay 1 x SQUARE PULLEY FIXING PLATE (90)
on floor, slot FEMALE SCREW BOLTS (91)
through the 4 holes from under side upwards and slot a
PULLEY COVER (84) onto the top 2 bolts followed
by PULLEY WHEEL (83)
as illustrated in step A.
Feed PEC CABLE (86) around both
PULLEY WHEELS (83) as illustrated in step B.
Slot a PULLEY COVER (84) onto the bottom 2 bolts
followed by PULLEY WHEELS (83) and wrap
CONNECTING CABLE (87) around them
as illustrated in step D.
Slot PULLEY COVER (84) on top of
2 x PULLEY WHEELS (83) as illustrated in step C.
Note: Be sure to fit PEC CABLE (86) through
plastic guides in each PULLEY COVER (84)
as illustrated.
Slot PULLEY COVER (84)
on top of 2 x PULLEY WHEELS (83)
as illustrated in step E.
Note: Be sure to fit PEC CABLE (86)
through plastic guides in each
PULLEY COVER (84) as illustrated.
Fit other SQUARE PULLEY FIXING
PLATE (90) over bolts and attach
using MALE SCREW BOLT (92) as detailed.
91
10mm X 35mm X M8
FEMALE SCREW BOLT x 4
92
M8 X 15mm
86
MALE SCREW BOLT X
PEC CABLE 1780mm LONG x
87
CONNECTING CABLE 3135mm LONG x
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
2
1
4
1
1
A
D
E
PEC
CABLE
86
B
C
CONNECTING
CABLE
87
F
YORK G510 / 13