York Fitness G510 Instruction Manual page 5

INSTRUCTION
Insert both WEIGHT PLATE POSTS (6) into
the rear of BOTTOM CROSS SUPPORT (3)
and secure using fixings ( Nuts / Bolts / Washers etc )
as detailed.
Make sure that the 65mm bolts pass through the holes
at the bottom of the WEIGHT PLATE POSTS (6).
Slide the 2 x 63.5mm RUBBER BUMPER PAD (75)
to the bottom of the WEIGHT PLATE POSTS (6).
Attach the MAIN FRAME SUPPORT (5) to
the front end of BOTTOM CROSS SUPPORT (3) with
two BOTTOM CONNECTING PLATE (7) and
secure using fixings ( Nuts / Bolts / Washers etc) as detailed.
BOTTOM
CONNECTING
PLATE
SHOULD YOU REQUIRE ANY ASSISTANCE REGARDING THIS PRODUCT PLEASE CONTACT YORK DIRECTLY
2
MAIN FRAME
SUPPORT
29
M10 x 75mm HEX HEAD BOLT x
32
M10 x 65mm HEX HEAD BOLT x
49
M10 x 23mm x 2mm
12
FLAT WASHER x
CHROME WEIGHT
PLATE POST
Slide the 2 x 63.5mm RUBBER
BUMPER PAD (75) to the bottom
of the WEIGHT PLATE POST (6).
RUBBER BUMPER PAD
Make sure that the 65mm bolts pass
through the holes at the bottom of
the WEIGHT PLATE POST (6).
4
2
48
M10 NYLON
6
LOCKNUT x
BOTTOM CONNECTING
PLATE
YORK G510 / 03